top of page
ESP32 IoT development board

ESP32 Universal IoT Dev Kit - Actuating

SKU: GS3005
$47.00Price
This unit is an ESP32 IoT 4 channel relay board with dev kit unit mainly designed to connect actuators to IoT-based systems. It has four integrated relay switches (4 Channels) to control devices. Further, it has a range of I/O pins for connecting sensors or actuators according to user requirements. The OLED display, buzzer and four push buttons are available for standard input and output. The unit can be programmed and employed using Arduino IDE, MicroPython and other Espressif chips compatible platforms such as ESP IDF. The block diagram of the module is shown below. This module is ideal for researchers, engineers, and hobbyists in IoT and embedded system development. It is versatile enough to be used in R&D and perfect for long-running applications and systems.

  • Applications of the Board

    This board can be employed in a wide range of applications, from R&D to industrial applications where IoT and embedded systems are in place. Even though a set of application domains has been listed below, the module can also be utilized in many other fields.

    • Smart farming
    • Smart cities
    • Weather stations
    • Environmental monitoring systems
    • Autonomous robots
    • Security systems
    • Research
    • Teaching and learning

  • Product Specifications

    Name: Universal IoT Dev Kit for Actuating
    MPN : GS3 ESP-32 IoT Unit for Actuating
    Marketing Status : Mass Production
    Temp: 40 ~ 85 (℃)
    Flash: 4 MB
    PSRAM: 520 KB
    Size: 122 x 88 mm
    Antenna: PCB
    Interfaces: I/O, I2C, One-wire, USB

  • Available Options

    The options available in the Fratello are:

    • MCU: ESP-32

    • Supports 802.11 b/g/n Wi-Fi connectivity with speeds up to 150 Mbps.

    • Support for both Classic Bluetooth v4.2 and BLE specifications.

    • Four integrated relay switches to control devices

    • Input: 4×Pushbuttons

    • 13×GPIO pins (Follow original ESP32 functions)

    • Output: OLED display, Buzzer, LED

    • I2C: 3×5V I2C pins, 3×3.3V I2C pins

    • Voltage output pins: 4×3.3V/200mA, 4×5V/600mA

    • 2×Dry contacts with debouncing filter

    • Tx0 and Rx0

    • USB Type-C port 

    • USB-to-UART Bridge

    • Resettable Fuse

    • Power Mode Selector Switch

    • Compatibility with Arduino IDE, MicroPython, and other Espressif chips compatible platforms

     

    Download The User manual

     

bottom of page